“Працюємо на стенді під підйомник вже пів року. Діагностика підвіски стала окремою послугою — 3–4 авто на день. Окупили швидше, ніж планували.”
Олександр Коваленко
[VIBROPRO]
Vibration stand for lift diagnostics
Professional suspension diagnostic vibration stand for floor installation and use with a vehicle lift.
Price
$8,450 · 365 500 грн
*price recalculated at current exchange rate
- Configuration
- 2 active pedestals + 2 passive pedestals
- Platforms
- Swivel platforms
- Retractable supports
- Mechanical
- Isolation
- Noise-vibration isolation
- Rods
- 9 rods per platform
A professional vibration stand for vehicle suspension diagnostics, designed for floor installation and operation with a lift. Ideal for workshops and service stations with lifting equipment. Enables precise chassis diagnostics and helps identify faults in the suspension, shock absorbers, and related components.
General
| Configuration | 2 active pedestals + 2 passive pedestals |
|---|---|
| Platforms | Swivel platforms |
| Retractable supports | Mechanical |
| Isolation | Noise-vibration isolation |
| Rods | 9 rods per platform |
Control
| Control | Remote + buttons on the body |
|---|
Technical
| Power | 5 kW |
|---|---|
| Load capacity | up to 4.5 t |
| Power supply | 220 V / 380 V |
| Speed | 540 cycles/min |
| Platform travel | 20 mm |
Dimensions
| Front pedestal size | 600×800×1200 mm (legs 1200/800) |
|---|---|
| Rear pedestal size | 500×500×1200 mm (legs 1000/500) |
2 active + 2 passive pedestals
Standard configuration for lift operation
380 V connection
Option to connect to a 380 V mains
[COMPARE]
Model Comparison
Specification table of all VibroPro models for quick configuration selection.
| Specification | Vibration stand for lift diagnostics | Vibration stand for inspection pit |
|---|---|---|
| Configuration | 2 active pedestals + 2 passive pedestals | 2 active pedestals |
| Platforms | Swivel platforms | — |
| Retractable supports | Mechanical | — |
| Isolation | Noise-vibration isolation | Noise-vibration isolation |
| Rods | 9 rods per platform | 9 rods per platform |
| Control | Remote + buttons on the body | Remote + buttons on the body |
| Power | 5 kW | 5 kW |
| Load capacity | up to 4.5 t | up to 4.5 t |
| Power supply | 220 V / 380 V | 220 V / 380 V |
| Speed | 540 cycles/min | 540 cycles/min |
| Platform travel | 20 mm | 20 mm |
| Front pedestal size | 600×800×1200 mm (legs 1200/800) | — |
| Rear pedestal size | 500×500×1200 mm (legs 1000/500) | — |
| Overall dimensions | — | 600×600×935 mm |
| Installation dimensions | — | 620×620×935 mm |
[REVIEWS]
Reviews of this product
“20 лет диагностирую ходовую на слух и монтировкой. На VibroPro за 15 минут нахожу люфты, которые раньше ловил часами. 9 штоков — это реально работает.”
Михаил
“Сначала смотрел на китайский аналог дешевле. Хорошо, что выбрал VibroPro: ребята сами работают на этом стенде у себя на СТО, поэтому всё продумано до мелочей.”
Виктор
“Купували як другий стенд у місті — конкуренти взяли раніше. Персонал пройшов навчання від виробника, питання по телефону вирішують за хвилини.”
Тарас Бондар
[REQUEST]
Consultation / Quote
Model is pre-selected in the form — leave your contact and we will call back.